Grow Lights Accessories
HID grow lights accessories and spares, we have a great selection of High Pressure Sodium lamps and Metal Halide lamps, contactor/relays, Grasslin plug timers, Eazi Roll reflector hangers and heat-shields, all quality components that can be used to replace worn or broken parts on your existing grow lights.
Powerplant HPS Lamps
Powerplant HPS lamps provide the correct spectrum of light for your plants to flourish in their flowering and fruiting period. These HPS lamps are a most efficient lamp for your growroom with a long life span of 24000 hours and are available in 250, 400, 600 watt.
From: £11.95
Powerplant Metal Halide Lamps
Powerplant Metal Halide lamps will provide the correct spectrum of light for your plants to flourish in their vegetative period. These MH lamps are retro fit and can be installed into any reflector and run on an MH or HPS ballast, available in 250, 400 and 600 watt lamps.
From: £11.95
Philips HPS Lamps
Philips High Pressure Sodium SON-T-PIA lamps are high quality lamps used by many growers. Philips HPS lamps are suited for horticulture and provide the correct spectrum of light for your plants to flourish in their flowering period and are available in 250, 400, 600 watt.
From: £14.95
Sylvannia HPS Grolux Lamps
Sylvannia HPS grolux lamps are a most popular lamp used for hydroponics, as they have added blue to deliver a broader spectrum of light. These lamps are great as they can be used for growing and flowering your plants, there is no need to change them.
From: £20.95
Lightwave T5 Fluorescent Tubes
Lightwave T5 fluorescent tubes are available in 600mm, 24w and 1200mm, 54w sizes and in both blue 865 and red 830 spectrum. These fluorescent tubes fit all our Lightwave T5 fluorescent light units to replace any broken or old worn tubes.
From: £5.50
Compact Fluorescent Lamps 55w
Compact fluorescent 55w re-placement lamps are suitable for use with our Maxibright propagation lighting units, the PL2 and PL4. These lamps are available in cool blue or warm red to suit the types of plants that you are raising under them and require very little power to run.
From: £9.80
Lighting Reflector Heatshield
A heatshield cleverly redirects the light and heat from the central hot spot created beneath all horizontally mounted HID lamps. Heatshields simply fit around the ceramic lamp holder on your reflector and the arm holds the angled perforated sheet below your lamp.
From: £13.00
Eazi Roll Reflector Hangers
Powerplant Eazi roll hangers are great to use for hanging a lighting reflector and achieving optimum height level, as they can support up to 10kg. Once fitted they are adjustable and your reflector can be pulled downwards or lifted up to the required level with ease.
From: £8.95
Jack Chain
Jack chain is a very strong metal linked chain that will support many heavy objects in your growroom. Jack chain is most commonly used for hanging reflectors but with its strength it is also possible to support large carbon filters, fans and silencers from your ceilings.
From: £1.30
Grasslin 24hr Segmental Timer
Grasslin 24hr segmental timers are set in 15-minute segments and can be used to control the On and Off times of many appliances in your growroom like pumps, fans and heaters. Simply push the pins out for the time period you require your appliance to be on.
From: £10.99
Grasslin Digital Timer
Grasslin Digital timers have a built in relay and can switch high current loads on many items in your growroom, but they are not recommended to use alone with a HID light. Grasslin digital timers give far more accuracy with your on and off periods compared to a segmental timer.
From: £24.50
Reflector Cable - IEC Connection
These 4 metre reflector cables have an IEC connection fitted and come ready to wire to your reflector to replace any damaged or worn cables. The live and neutral wires are put into the E40 lamp holder and the earth wire should be fitted to the reflector.
From: £9.50
E40 Ceramic Lamp Socket
E40 Ceramic lamp holders can be used to replace any worn or broken lamp holders on your HID light reflectors by simply screwing the E40 holder onto the reflector bracket and rewiring your cable in the holder. They can also be used for DIY set ups and will fit CFL's.
From: £5.00
Powerstar Light Contactors
Ecotechnics Powerstar contactor/relays simply plug into your timer when using a HID light for your indoor garden. A contactor will protect your light kit against the inductive load of the control gear, as ordinary household timers will not cope with this load and burn out.
From: £19.95
Powerstar Pro Light Contactors
These Ecotechnics Powerstar Pro contactors have a 15-minute segmental timer built into the unit, a double power outlet from a ring main is required and the pins on the timer can be pushed in or out to set your light times. Pro light contactors can safely strike many lights at the same time.
From: £80.00
IEC Reflector Connectors
These IEC male and female connectors can be rewired and are great to use if you need to replace your reflector or ballast IEC connection. These IEC connectors can also be used to lengthen any electrical cables in your growroom for pumps, fans or heaters.
From: £3.00
Our Products
